Christmas is a great time for making things. So what better reason to introduce my olders daughter to the lathe in this newest Adventure in the Workshop? She makes a Christmas Tree Tealight Holder from walnut. Her patience for sanding is not the best, but as she says, this way you know you made it yourself. Please enjoy and share! And as always, remember to be Inspired!
In this new Adventure in the Workshop, Nina, Sonja and I made a garden obstacle for them to play horse, featuring variable heights, scrap use and a lot of “horsing around”. Please share this if you found it useful, find more information below the video, and remember to be Inspired!
A Note on Tools and Materials
I think the circle cutter is a nice tool to introduce kids to the different ways of cutting holes. At the very least it adds a little novelty to the build, otherwise using tools that are pretty common. If you do not have a circle cutter, though, or do not feel comfortable using them around kids, you can have them cut out the holder pieces on the scroll saw as well. In fact, these pieces do not even need to be round at all. You can get away with a v-shape made from short lengths of slat.
I used a lot of scrap pieces (which I think is most obvious in the way the corner pieces look). The L-shape gives them stability, but you could get the same result using small beams. You could also glue or screw two scraps together to make that L if you want your garden obstacle to be a little more stable.
Lessons learned from the Garden Obstacle
One thing I did not take into account was how the base board would react to living outside, exposed to the elements. It started to cup in such a way that both sets of obstacles started to come together and the whole thing would rock slightly. I could have screwed another board to this one to keep is straight, but I chose to take advantage of the dowel connections and bend the holders out slightly. This way the obstacles are at a distance again and the whole thing can still be used.
Those dowel connection, meant to allow the thing to come apart if a kid hits it the wrong way, do not work very well in practice either. Most likely due to moisture making the dowels swell, in addition to the hole being a really tight fit in the first place. But as it turns out, the kids hardly ever hit the wooden pieces at all, so at least in my experience this feature is unnecessary.
Check out the other Adventures in the Workshop for more ideas on what you can make with your kids while teaching them the basics of tool use and making.
Thanks for reading, and as always, remember to be Inspired!
This is the first episode of a new series that I am doing, called “Adventures in the Workshop”, in which I try to teach my daughter Nina about the workshop and the tools I use frequently. But before we can dive into it propery, we needed to discuss safety. After all, I want my daughter to remain in one piece, and I imagine that you will feel the same about any kids you might want to introduce to the marvelous world of making. Enjoy, let us know what you think, and remember to be Inspired!